Smartmax firmware release 1.0.9

A new firmware for Smartmax modem has been released and a copy of the firmware can be obtained by contacting the technical department via e-mail support@maxon.com.au or via phone +61 (0)2 8707 3000. Some of the features such as Digital I/O Automation, I/O logging in to internal memory and enhancements to UDP/IP STACK and inbound IP Filtering have been added to this new firmware.

Newly Added Features

Digital I/O Scheduler

This feature allows configuring the modem digital output control on and off depending on the time and day of the week. Each output has a profile where an ON and OFF time can be set and the modem activates this output automatically as per configuration. This feature automates the Smartmax IO functionality and can be used in lot of applications, e.g. irrigation control, gates control, etc.

I/O WEB Automation:

IO Automation is another handy feature added in the modem that allows automating I/O operations locally and remotely. A change off input can be set to trigger switching ON or OFF an output at two remote sites. This operates over IP and requires all SmartMax modems to use a private network such as maXwan.

e.g. Toggling input 1 on Smartmax A (IP address 10.0.0.1), can be set to switch Output 1 on Smartmax B (IP address 10.0.0.2) and Output 2 on Smartmax C( IP Address 10.0.0.3 )

IO and Modem log file saved in CSV format:

The Smartmax modem saves by default all digital/Analog I/O status in CSV file with date and time stamp. It also saves the modem signal, battery and temperature values.
Maximum Data that is stored is for 3 days with updates set every 1 min.

IP Filtering

IP Filtering allows specifying multiple rules for Smartmax Modem External (WAN) Interface. User can define up to 10 rules that controls incoming connection on specific TCP/UDP Ports as well as IP address.

UDP Keep Alive and Wake Up

In order to enhance UDP stack communication within the Smartmax, we have introduced new configuration options, which would give our customers more control over the UDP activity and data communication side. Now our customers can enable or disable keep alive and can specify Wake up time in seconds where with this feature the Smartmax will send UDP dummy packets prior to sending any data received via serial port. The modem will send dummy packet twice as per timing set, followed by the actual data.

Enabling this could lead to additional delay in data transfer due to modem sending dummy packet first to initialize the UDP connection with remote site.

To obtain a copy of this firmware please contact Maxon Australia on +61 (0)2 8707 30000 or email support@maxon.com.au

Maxon Australia have extensive experience in custom projects including customised M2M Enclosures to suit customers’ specific needs.

Maxon has a range of IP67 rated & other industrial enclosures perfect for field applications including the Shieldmax and the Smartmax Mini IO Controller.
Click here for more information on the Shieldmax – The Shieldmax is an ideal solution for Automated Meter Reading and Advanced Metering Infrastructure applications utilising 3G connectivity for data retrieval and two way communications. Small footprint IP67 rated case can be discretely mounted next to the meter providing access to serial connectivity and external antenna.
Click here for more information on the Smartmax Mini IO Controller – This powerful all-in-one solution leverages the powerful intelligence of the Smartmax Modem in conjunction with the I/O Interface Controller for wide-ranging flexibility for system integrators and users for automating and controlling innumerable field applications.

Speak to a Maxon Representative today for more information on how this can enhance your business application via sales@maxon.com.au or phone +61 (0)2 8707 3000 today.

New End-to-End SaaS Solutions

End-to-End SaaS Solutions

Maxon is to provide MaxConnect – a diverse range of powerful end-to-end SaaS solutions to enhance & manage your M2M business.

More information will be released shortly about these powerful solutions to be launched in April 2011 so stay tuned for more details.

To be one of the first to be advised on the highly-anticipated MaxConnect service, click here to register your interest.

The USB TO ETHERNET Converter is now available as an add-on for the Smartmax modem to add Ethernet connectivity.
A powerful simultaneous RS232 & Ethernet connection is now possible!!
For further information and to purchase this accessory, contact Maxon at sales@maxon.com.au or on +61 (0)2 8707 3000.

Add Ethernet functionality to your Smartmax!!

Attached to the Smartmax Modem

Compatible with Smartmax Firmware Version 0.4.13

Maxon Australia would like to thank all those who visited us in WA last week.

Both the AHA conference and SmartMax breakfast launch were a great success.

We are very pleased with the support of all those involved and who made this possible.

If you require any further assistance or more information on any of the products please contact our office on +61 2 8707 3000 or via e-mail at sales@maxon.com.au.

We hope to see you again soon!

Don’t miss this opportunity to get all the insider information on Maxon’s newly launched SmartMax Modem solution.

Maxon Australia brings you new & innovative next-generation products. Be one of the first to experience this newly released benchmark product and learn more about how these can enhance your business.

The Webinar will take place Tuesday, October 12, 2010 1:30 PM – 2:15 PM AEST.

To join our webinar:

1.
Sign up here.

2.
Click here to join.

3.
Join the conference call:

Dial: 1800 655 496
International Number: +61 1800 655 496
Access Code: Account #: 94029453 – Pin 2791

Webinar ID: 315-163-811

Register now to be informed on how these Maxon M2M solutions can benefit your business today.

Maxon representatives will be available to answer any queries you may have.

Join Maxon Australia for the official launch of our new product, the SmartMax, by participating in our Webinar being held on Tuesday the 12th of October from 1:30pm to 2:15pm.

Be one of the first to experience this newly released benchmark product and learn more about how these can enhance your business.

Maxon representatives will be available to answer any queries you may have.

To join us please sign up here: https://www2.gotomeeting.com/register/315163811

We look forward to seeing you there.

Last week we discussed SmartMax IP STack Auto Mode, this week we will go through the SmartMax IP Stack Manual mode.

With SmartMax Manual mode, you will have to do all your stack configuration via the SmartMax web interface by going to the IP Stack configuration page under Advanced. The modem will activate the serial port and wait for AT command input in order to initiate the PPP and socket connection.
The SmartMax IP Stack AT commands are the same as the Modmax IP Stack AT commands.
For example:

In addition to this you can start and stop the stack by sending an SMS message to the modem via the SIM card’s voice number as follows:

(Note: These SMS commands are only supported IP Stack Manual Mode)

SmartMax IP Stack has 2 modes; auto and manual mode. This week we will cover the IP Stack auto mode.

SmartMax auto mode will behave exactly like the Modmax IP Stack auto mode, as in you can configure the modem as an IP Stack server or client and even have the option of directing your communication on the serial RS232 or RS485 port. The only difference between the Smartmax Stack and the Modmax Stack is that all of your configuration will need to be done via the web interface of the SmartMax.
Which is good in the way that if you know the IP address of your Smartmax you can still do modification or changes to your stack configuration.

Again for any configuration on the SmartMax you will need to use the Mini USB cable connected the SmartMax LAN port.

This week we will discuss what AT commands you can use with the SmartMax and why it is limited.

With the SmartMax every thing is controlled via the onboard processor, so when you type any AT command on the serial port the on board processor takes this command and responds back based on the module status, and for that we had to support the basic common function that any legacy device might send to the modem based on the fact that it is a serial modem.
However if you want to talk to the Module and send more serial commands you can do this via the Web Interface AT commands section or by accessing the module directly via the mini USB port.

Here is a summary of AT Commands that you can use on the SmartMax serial port:
Serial Interface Configuration: at+ipr, at+ifc, at&d, at&c, ats0, at&w
SMS Commands: at+cmgf, at+cmgs
IPStack Commands: at$$ipctop, at$$ipctos, at$$ipctcs,
Diagnostic Commands : ati, at$$rssi, at&v, at+creg, at$$reset