| View previous topic :: View next topic |
| Author |
Message |
MaxonStaff Maxon Staff
Joined: 24 Jan 2007 Posts: 896 Location: Sydney, N.S.W. Australia
|
Posted: Wed Mar 03, 2010 3:41 pm Post subject: Unimax HSUPA can be configured remotely via SMS messages |
|
|
Did you know that you can configure your Unimax remotely if someone resets the WAN Connection settings?
You can reconfigure your Unimax remotely with the WAN basic settings as the APN, username, password and authentication, by sending an SMS message to your Unimax phone number |
|
| Back to top |
|
 |
Sawera
Joined: 23 Jan 2008 Posts: 62
|
Posted: Thu Mar 04, 2010 3:19 pm Post subject: Unimax configuration |
|
|
| Maxon can you please post how to send this SMS and what the format is? Also is this something available in all different firmwares? What is the latest firmware for the Unimax modem and is this available on the maxon website. |
|
| Back to top |
|
 |
MaxonStaff Maxon Staff
Joined: 24 Jan 2007 Posts: 896 Location: Sydney, N.S.W. Australia
|
Posted: Fri Mar 05, 2010 8:58 am Post subject: Unimax configuration |
|
|
Quick guide on how to setup the network credentials remotely via SMS
Change APN use following syntax (e.g. telstra.extranet)
UNIMAX.PARK.APN telstra.extranet
Change ID, Password and Authentication (username: maxon@maxon.com.au, password: maxon, Authentication: chap)
UNIMAX.PARK.AUTH maxon@maxon.com.au:maxon:chap
Check Settings and IP address of Unimax.
UNIMAX.PARK.WANIP
Reboot Unimax by SMS
UNIMAX.PARK.REBOOT
For further info on the SMS feature or latest firmware please contact the Maxon Technical help desk team on +61 2 8707 3000 or e-mail support@maxon.com.au. |
|
| Back to top |
|
 |
|