Tech Blog

Displaying items by tag: industrial router
Tuesday, 03 December 2013 23:14

CSD to IP change from CSD call

The Maxon Intelimax modem has the unique in-built feature of being able to change between modes and configure settings remotely over a CSD call. This is especially useful if you have a modem in the field that you need to remotely configure using remote AT commands or the Intelimax GUI but are currently using CSD to talk to this modem. Using these commands lets you change to an IP connection for easy access to the device over an IP connection. This feature is available from firmware versions 0.1.67 onwards.

It is very important to ensure that you can access your modem once this is done which means either using a static IP address (private IP WAN or similar) or a public dynamic IP address such as telstra.extranet the WAN IP of which can be found via SMS.

Dialing Process
Dial out to the modem via a command line terminal session to your data modem using the data number of the SIM card in the Intelimax. The sting will be as follows: ATDT0400123456. Once the ‘CONNECT’ message has been displayed you are connected.
Intelimax Remote Configuration Commands
The following commands can be used to change the settings of the Intelimax:

  • Unlock the CSD programming interface: program.maxon.unlock=admin:admin
  • admin:admin are the default username and password, if you have changed these update this command with the appropriate values in the order username:password.
  • Update the cellular APN: program.maxon.apn=telstra.extranet
  • Update the CPN username, password and authentication: program.maxon.auth=userid:password:chap/pap/none
  • Change the mode of the modem: program.maxon.mode=1


Where:
1- IP Stack Auto mode –auto connect IP
2- IP Stack Manual mode –manual connect IP
3- Serial modem mode –for CSD or when end device controls connection

Apply all the settings and reboot: program.maxon.lock
Once the commands have been received by the modem it will display ‘Modem will reboot now’ and the call will be dropped as the modem reboots:
Once the modem reboots (approximately 2 minutes) if a public dynamic IP address has been used it can be found using the following SMS to the phone number (not data number) of the SIM in the modem:

INTELIMAX.PARK.WANIP

Published in DEVELOPMENT NEWS
Thursday, 05 September 2013 01:32

Multimax explained in our upcoming webinar

Join us September 25 11.00am EST for a technical webinar highlighting our new Multimax Dual Port Router and the upgraded Datamax+.

Click here for more information and to register.

Published in DEVELOPMENT NEWS
Tuesday, 13 August 2013 23:31

Dual Port Rugged Industrial Router

With multiple connectivity options, the Multimax MA-2040 is a rugged 3G router suitable for a diverse range of industrial M2M applications.

The Multimax features dual-SIM capabilities as well two Ethernet ports, which provides advanced redundancy functionality. The price point of this device will astound you with its standard menu of features and capabilities when compared with similar products available in the market.

Suitable for applications from video streaming to expandable device monitoring, the Multimax is an adaptable, multi-purpose device for all your data needs.

Published in DEVELOPMENT NEWS